T3SNC-12T3000W Plate Bending Machine
T3SNC-12T3000W Plate Bending Machine is a kind of double pinch plate bending machine. The top roller is hydraulic driving. The top roller is vertically and horizontally adjustable, and the two lower rollers are fixed. All of the rollers in alloyed steel are induction hardening and heat treatment. All of the rollers will be grinded and polished after induction hardening treatment.
Features
▲electronic parallelism control system
▲rollers synchronization and balancing control fully electronically controlled
▲top roller hydraulic driving, can be vertically and horizontally adjustable.
▲anti-friction material in sliding area
▲instantaneous brake for rollers rotation for high safety
▲reversal side hydraulic driving
▲Mobile control panel station, with low voltage control
▲Mobile control push-buttons, convenience for operator
Parameters
W11SNC-120x3000 | |||
Rated Pressing Force from Upper Roller | Ton | 1600 | |
Working temperature | At natural temperature | ||
Plate yield limit | MPa | 245 | |
Max. | Thk. of bending plate | (mm) | 120 |
五福彩票Thk. of pre-bending | 100 | ||
Width of bending plate | 3200 | ||
Min. rolling dia. with max.size | (mm) | 350 | |
五福彩票Diameter of Roller | Upper | mm | 920 |
Bottom | mm | 560 | |
Working Rollers | Material | 42CrMo | |
Hardness | (HB) | 260-300 | |
Induction Hardened Roll | YES | ||
Roll Profile | crown | ||
五福彩票Lifting Mode | hydraulic | ||
五福彩票Central distance of bottom rollers | mm | 1080 | |
Diameter of supporting roller | mm | 520 | |
五福彩票Adjusting way of supporting rollers | motorized | ||
Rolling speed | m/min | 3.5 | |
五福彩票Upper roller descending speed | mm/min | 120 | |
Upper roller ascending speed | mm/min | 200 | |
五福彩票Upper roller horizontal moving speed | mm/min | 100 | |
Upper roller supporting way | Self aligning roller bearing | ||
Bottom roller driving way | 五福彩票motor + reducer + breaker | ||
五福彩票Upper roller horizontal moving way | 五福彩票motor+ warm gear | ||
Upper roller horizontal moving speeding | mm/min | 100 | |
五福彩票Upper roller Synchronous Precise/Accuracy | ±(mm) | ≤0.20 | |
五福彩票Upper roller moving precise/accuracy | ±(mm) | ≤0.20 | |
五福彩票Upper roller re-position precise/accuracy | ±(mm) | ≤0.20 | |
Upper roller action control | PLC + transducers | ||
Conical Bending Device | YES | ||
五福彩票Power character | 五福彩票380V/50Hz/3phase | ||
五福彩票Control System | Control way | 五福彩票PLC control + moving controller | |
五福彩票Display of position & displacement | LCD | ||
PLC | OMRON | ||
Electrical Part System | SIEMNENS | ||
Main Power Motor | (KW) | 110 | |
五福彩票Motor for hydraulic | (KW) | 55 | |
五福彩票Motor for horizontal moving | (KW) | 30 | |
Hydraulic System | Max. Working Pressure | (MPa) | 25 |
Valve | YUKEN | ||
Seal | VALQUE | ||
Electrical & Hydraulic Protection Againts Overload | YES | ||
Construction Steel Material | Q235 | ||
Side Support for Big Sheet Metal Diameters | optional | ||
五福彩票Central Support for Big sheet Metal Diameters | optional | ||
五福彩票Feeding Table | optional | ||
五福彩票Oil Cooler System | optional | ||
